服務熱線
李經理13695310799汽車模型保養要注意哪些?
發布時間:2021-03-10 來源:http://zaiguo.cn/
擺放時注意防塵
Pay attention to dust prevention when placing
擺放時應注意防塵,不要隨意將汽車模型擺放在辦公桌或一般的臺面上,而應該套一個有機玻璃罩,防止灰塵進入車模。如果經濟許可,購買可接續組合的模型專用萬品框,防塵兼防潮,十分好用?!盎蛘邔④嚹7胖迷诓AЧ駜?nèi),接觸車模時應戴上手套,防止酸性的汗液腐蝕車漆?!避嚹J詹貝酆谜呷惴逄嵝颜f。
Pay attention to dust prevention when placing the car model. Don't put the car model on the desk or general table, but cover it with a plexiglass cover to prevent dust from entering the car model. If the economy permits, the purchase can be connected to the combination of the model dedicated wanpin frame, dust and moisture-proof, very easy to use. "Or put the car model in the glass cabinet, and wear gloves when touching the car model to prevent the acid sweat from corroding the car paint." Ru Feng, a car model collector, reminds us.
別忽視漆面打蠟
Don't neglect the wax on the paint
高端汽車模型的漆面幾乎都采用與真車一樣的烤漆,因此,對車模漆面的保養也是不容忽視的。保養車模漆面時,可以用碧麗珠把眼鏡布濕潤后擦拭車漆。如果需要進一步保養時,也可以用非常細膩的水蠟擦拭車身,這樣不僅可以養護車漆,還不容易落灰。另外,需要注意的是,每次打蠟的時候蠟不能太多,而且要注意車模的縫隙,不能將蠟滴到縫隙里。
The paint surface of high-end car models almost adopts the same baking paint as the real car. Therefore, the maintenance of the paint surface of car models can not be ignored. When maintaining the car model paint surface, you can use BILIZHU to wet the eyeglass cloth and then wipe the car paint. If you need further maintenance, you can also use a very delicate wax to wipe the car body, which not only can maintain the car paint, but also is not easy to fall ash. In addition, it should be noted that the wax should not be too much each time, and pay attention to the gap of the car model, and the wax should not drop into the gap.
用干燥劑保持干燥
Keep dry with desiccant
擺放汽車模型的柜子要保持一定的濕度,不能太干燥,也不能太潮濕。另外還需要注意的是,不要用射燈長時間照在模型上面,這樣產生的高溫就不會使車輪和塑料配件變形。反過來,如果環境過于潮濕,可以用干燥劑保持柜內的干燥度。
The cabinet where the car model is placed should keep a certain humidity, not too dry or too wet. In addition, it should be noted that do not use spotlights to shine on the model for a long time, so that the high temperature will not deform the wheels and plastic parts. Conversely, if the environment is too humid, desiccant can be used to keep the cabinet dry.